ISSN : 2488-8648


International Journal of Basic Science and Technology

A publication of the Faculty of Science, Federal University Otuoke, Bayelsa State

Home About IJBST For Authors Issues Useful Downloads Contact


FAQ OJBST

Questions are asked and these questions need answers. This is the reason why this page is created to enable us share few worries!

×
Archive | ISSUE: , Volume: Oct-Dec-2022

Polarization Corrosion Effects of Nanocellulose Reinforced Zinc Magnesium Oxide Coatings on A36 Steel in Acidic Media


Author:Anyanwu et al., 2022

published date:2023-Jul-13

FULL TEXT in - | page 168 - 177

Abstract

Adverse corrosion effects of A36 steel has become an interminable cause of concern when employed in construction applications. The steel is generally applied in diverse construction application as a result of its comparatively good mechanical properties, availability and cost effectiveness. This research was aimed at studying the polarization corrosion effects of nanocellulose reinforced zinc- magnesium oxide (Zn-MgO-xCn) composite coatings on locally sourced A36 steel in acidic media. The corrosion rates of the deposited coatings were determined via potentio-dynamic polarization method in 1M solution of hydrochloric acid. The surface morphology and phase evolution of the composite coatings were determined by optical microscopy and x-ray diffractometry, respectively. Results from the study showed that the deposited composite coatings presented lower corrosion rate values than that of the as received A36 steel sample, whose values was 5.3243 mm/y. Sample Zn-20gMgO-15gCn (D7) had the lowest corrosion rate value of 0.5603 mm/y, with a protection efficiency of 89% on the substrate. Finally, among the deposited coatings, sample Zn-20gMgO-0gCn (E1) gave the highest corrosion rate values of 1.9137 mm/y, corresponding to a protection efficiency values of 64%. The study showed that the composite coatings were able to form protective barriers on the A36 steel substrate in the acidic media.

Keywords: Acid, Media, Nanocellulose, Corrosion, Coatings

References

Abioye, O.P., Fayomi, O.S.I. and Loto, C.A. (2020). Electrochemical Study of Co-Deposited Zn-ZnO on ASTM A36 Mild Steel for Marine Application. Journal of Bio- and Tribo-Corrosion 6:74-81

Abioye, O.P., Loto, C.A., Fayomi, O.S.I. (2019). Evaluation of antibiofouling progresses in marine application. J Bio Tribo Corros 5(1):22

Popoola A.P.I. and Fayomi, O.S.I. (2012). Performance evaluation of zinc deposited mild steel in chloride medium, Int. J. Electrochem. Sci., 6: 3254-3326.

Chakraborty, M. S. and Kortschot, M. (2005). Cellulose Micrfibrils: A novel method of preparation using high shear refining and cryo crushing, Holzforschung, (59) 102-10.

Kadham, J., Hassan, N. M., and. Hashim, A. (2018). Fabrication of (Polymer Blend-magnesium Oxide) Nanoparticle and Studying their Optical Properties for Optoelectronic Applications. Bulletin of Electrical Engineering and Informatics, 7 (1) 28-34.

Anyanwu B.U. Oluwole O.O,  Fayomi, O.S.IOlorunnisola. A.O, Popoola A.P.IKuye , S.I.  (2021). “Synthesis, corrosion and structural characterization of kenaf nanocellulose on Zn-ZnO-xCn electrolytic coatings of mild steel for advanced applications”. Case Studies in Chemical and Environmental Engineering. Publication by Elsevier Ltd. (3) pp 1-5

https://doi.org/10.1016/j.cscee.2020.100017.

Anyanwu B.U, Adebomi O. A,. Fayomi O.S, Kuye S. IIgba, U.T.  and.Oluwole O.O. (2019a). “Effects of kenaf core and bast fibers as dispersing phases on low density fiberboards (engineered wood)”. Journal of Physics: Conf. Series, Vol. 1378, pp. 022024 doi:10.1088/1742-6596/1378/2/022024.                                      

Anyanwu B.U, Olayinka G.O ,Ezeokeke, D.T, Fayomi, O.S, Oluwole O.O. (2019b).“Effect of Kenaf Core Fibre (Hibiscus cannabinus) as one of the Dispersing Phases in Brake Pad Composite Production”. Journal of Physics: Conf. Series, Vol. 1378, pp. 042046. doi:10.1088/1742-6596/1378/4/042046

Fayomi O.S.I, Popoola A.P.I (2015a) .Anti-corrosion and tribomechanical properties of co-deposited Zn–SnO2 composite coating. ActaMetall Sin (English Letters) 28(4):521–5

 

Fayomi O.S.I (2015b) Chemical interaction, interfacial effect and the microstructural characterization of the induced zinc–aluminum– Solanumtuberosum in chloride solution on mild steel. Res Chem Intermed 41(4):2393–2405

 

Loto C.A, Loto R.T. (2018). Effect of combined trisaminomethane and hexadecyltrimethyl ammonium bromide (Hdtab) inhibitors on mild steel in nitric acid. Orient J Chem 34(3):1551–1558

Jonoobi M, Harun J, Mathew A, Zobir M, Hussein B, and Oksman K. (2010). Preparation of cellulose nanofibers with hydrophobic surface characteristics. Cellulose, (17) 299–307.

Jonoobi M, Harun J, Shakeri, A, Misra M, and. Oksman K. (2009). Chemical composition, crystallinity and thermal degradation of bleached and unbleached kenaf bast (Hibiscus cannabinus) pulp and nanofibers. BioResources 4(2) 626– 639.

.Meulendijks N, Burghoorn M, Mourad M, Mann D, Keul  H,.Bex G, Veldhoven  E, Verheijen M, and. Buskens P. (2017). Electrically conductive coatings consisting of Ag-decorated cellulose nanocrystals, Cellulose, (24) 2191–2204.

Fayomi O.S.I and Popoola A.P.I. (2015c). Development of smart oxidation and corrosion resistance of multi-doped complex hybrid coatings on mild steel. J. Alloys Compd. (637) 382–392.

Fayomi O.S.I, Joseph O.O, and Popoola A.P.I (2017). Structural properties and micro-hardness performance of induced composite coatings filled with cocosnucifera-tin functionalized oxide, Energy Proceedia, (119) 910-915.

Praveen Kumar C.M, Venkatesha T.V, Vathsala K, Nayana K.O (2012) Electrodeposition and corrosion behavior of Zn–Ni and Zn–Ni Fe2O 3 coatings. J Coat Technol Res 9(1):71–77

Praveen B.M, Venkatesha T.V (2008) Electrodeposition and properties of Zn-nanosized TiO2 composite coatings. Appl Surf Sci 254(8):2418–2424

 

Riskin J, Khentov A (2019) Electrocorrosion and protection of metals. Elsevier, Amsterdam, pp 3–47

 

 Jinshu S, Sheldon Q, Shi H, Barnes M, Horstemeyer M, Wang J, and Hassan E .M (2011). KenafBast Fibers—Part I: Hermetical Alkali Digestion. International Journal of Polymer Science, Article ID 212047. 8 pages

 doi:10.1155/2011/212047.

 

Unueroh U, Omonria G, and Awotunde M. (2016).  Pipeline Corrosion control in Oil and Gas Industry: A case study of NNPC /PPMC System 2A Pipeline. Nigerian Journal of Technology (NIJOTECH), 35 (2) 317 – 320.

FULL TEXT in - | page 168 - 177

Issue Archive

Volume 12 2026

Volume 11 2025

Volume 10 2024

Issue 2-Apr-Jun
Issue 1-Jan-Mar

Volume 9 2023

Issue 4-Oct-Dec
Issue 3-Jul-Sep
Issue 2-Apr-Jun
Issue 1-Jan-Mar

Volume 8 2022

Issue 4-Oct-Dec
Issue 3-Jul-Sep
Issue 2-Apr-Jun
Issue 1-Jan-Mar

Volume 7 2021

Issue 4-Oct-Dec
Issue 2-Apr-Jun
Issue 1-Jan-Mar

Volume 6 2020

Issue 4-Oct-Dec
Issue 3-Jul-Sep

Volume 5 2019

Issue 4-Oct-Dec
Issue 2-Apr-Jun
Issue 1-Jan-Mar

Volume 4 2018

Issue 4-Oct-Dec
Issue 3-Jul-Sep
Issue 2-Apr-Jun

Volume 3 2017

Issue 4-Oct-Dec
Issue 1-Jan-Mar

Volume 2 2016

Issue 4-Oct-Dec

Volume 1 2015

Issue 4-Oct-Dec


Copyright © International Journal of Basic Science and Technology | Faculty of Science, Federal University Otuoke 2019. All Rights Reserved.
P.M.B. 126, Yenagoa. Bayelsa state Nigeria